6000 TDS Low Pressure RO Membrane for Industrial Brackish Water RO System
As the most important component of water treatment, the reverse osmosis membrane has very strict requirements on the quality of the influent water during use. Because the pore size of the reverse osmosis membrane is very small, it is necessary to remove suspended solids, microorganisms, colloidal substances and organic matter as much as possible, otherwise the quality of the influent water does not meet the requirements. It is easy to cause blockage and pollution of reverse osmosis membrane.
Factors affecting reverse osmosis membrane:
Inlet water pressure, inlet water temperature, inlet water PH value, inlet water salt concentration.
Increasing the water inlet pressure can increase the water production and the desalination rate, but the salt permeation is basically unchanged, and the water production can be increased. When the inlet water pressure exceeds a certain value, the water production and desalination rate will not increase, because each membrane has an upper limit. As the inlet water temperature increases, the water production will also increase, and the pH The value has little effect on the water yield, but has a relatively large impact on the desalination rate.
The product specification
| Model Number | Description | 8040-LP |
Performance &
Test Condition | The Desalination Rate % | 99.5% |
| Average Permeat Fow GDP | 10500 |
| Test pressure | 225psi |
| Test solution Temperature | 25± 1ºC |
| Test Solution Concentration NaCl | 2.0-11.0 |
| Recovery Of Single-Branch Membrane Element | 15% |
| Feed water SDI | 5 |
- When PH is above 10, the Maximum Temperature of Continuous Operation is 35ºC.
- Under certain conditions, the presence of free chlorine and other oxidants in the water may cause serious membrane damage, which doesn't belong to product warranty range.
Operating Limit:
| Maximum Operating Temperature | 113ºF(45ºC) |
| Maximum Working Pressure | 600psi(41.0 bar) |
| The high pressure drop | 15psi (1.0bar) |
| Continuously operating PH range a | 3-10 |
| Short wash PH range (30min) b | 2-12 |
| Maximum feed water SDI | SDI 5 |
| Tolerance Of Free Chlorine | <0.1ppm |
| Maximum pressure drop for single membrane element | 15psi(0.1Mpa) |
Dimension of Membrane Element
PROCEDURES
FAQ:
1. Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
2. Q: Should we use our logo/brand?
A: Yes, OEM is absolutely supported. But for some items quatity is 500pcs.
3. Q: What is the filtering accuracy of RO membrane?
A: RO meembran filtering accuracy is 0.0001um.
4.RO membrene desalination rate and service life ?
A: RO meembran desalination rate more 98%,service life according to water quality 2-3years
5. Q: What is the payment?
A: Usually we offer two payment terms: by Alibaba or by TT. L/C and D/A.
6. Q: How long time have your company in water treatment?
A: We have more than 18 years experience in water treatment equipment/water treatment solution.
Product Tags:
|
|
High Tds After Changing Ro Membrane For Brackish Water 6000 TDS Low Pressure Images
|
